The FTTEGO OD6625 is a P6.25 outdoor LED display built on a thin 1,000 × 1,000 × 100 mm aluminium panel. SMD2727 LEDs, a 3,840 Hz refresh rate and IP66 protection keep content clear and reliable outdoors, and the display is available in 6,000–6,500 and 9,000–10,000 nit versions. Large-format visibility for facades and roadside media.

Representative product image
FTTEGO OD6625 outdoor LED display — its key optical, panel and protection details.
Pixel pitch
Brightness
Protection rating
Refresh rate
Viewing angle
Panel size
Contrast ratio
Minimum viewing distance
| Parameter | Specification |
|---|---|
| LED type | SMD2727 |
| Pixel pitch | 6.25 mm (P6.25) |
| Pixel density | 25,600 pixels/m² |
| Module size | 500 × 250 mm |
| Module resolution | 80 × 40 pixels |
| Modules per panel | 8 (2 × 4) |
| Driving mode | 1/8 scan |
| Panel resolution | 160 × 160 pixels |
| Brightness | 6,000–6,500 / 9,000–10,000 nits |
| Viewing angle | 160° / 140° |
| Minimum viewing distance | 6.2 m |
| Contrast ratio | 10,000:1 |
| Frame frequency | 50 / 60 Hz |
| Grey level | 14–16 bit |
| Refresh rate | 3,840 Hz |
| Parameter | Specification |
|---|---|
| Panel size | 1,000 × 1,000 × 100 mm |
| Panel material | Aluminium |
| Panel weight | 24 kg |
| Maintenance | Front and rear |
| Max / average power | 750 W / 200 W |
| Input power | AC 90–264 V |
| Ingress protection | IP66 |
| Working temperature / humidity | −30 to +60 °C / 10–85% RH |
| Storage temperature / humidity | −30 to +60 °C / 10–85% RH |
Brightness version, controller and accessory configuration are confirmed for each project. Share your wall size and viewing distance when requesting a quotation.
SMD2727 LEDs with 6,000–6,500 / 9,000–10,000 nits brightness, a 3,840 Hz refresh rate, 14–16 bit grey level and a 10,000:1 contrast ratio.
A 1,000 × 1,000 mm panel only 100 mm deep and 24 kg, holding eight 500 × 250 mm modules in a 2 × 4 arrangement.
IP66 protection with a sealed power box and modules, and a working range of −30 to +60 °C at 10–85% humidity.

With a minimum viewing distance of 6.2 m, the OD6625 suits large building facades, roadside advertising and stadium surroundings viewed from longer distances. Typical applications include:
These are illustrative applications. The final installation design and equipment depend on the project.
The P6.25 pixel pitch gives a panel resolution of 160 × 160 pixels and 25,600 pixels per square metre, using SMD2727 LEDs with 1/8 scan driving. A 3,840 Hz refresh rate at 50/60 Hz and 14–16 bit grey levels keep motion smooth and gradients clean.
Brightness: 6,000–6,500 / 9,000–10,000 nits. Viewing angle 160° / 140°.
LED modules can be removed from the front or rear, and a detachable power box combines the receiving card, hub card and power supply in one unit that is also serviceable from both sides.
Modules connect to the panel through a hard-connection hub, giving stable power and signal transmission without internal module cabling.
The panel can be paired with a 562.5 × 1,000 mm curved cabinet to build seamless 90° L-shaped displays for naked-eye 3D content. Panels with a 45° cut edge also form right-angle corners.
Input power is AC 90–264 V, with maximum and average power of 750 W and 200 W.
Contact FTTEGO for availability, configuration details and a quotation for your project.
Other pixel pitches in this range: OD6297 · OD6391 · OD6481 · OD6781 · OD61042. See also the OD6039 and OD6025 outdoor LED displays, or browse all FTTEGO outdoor digital displays.
Contact FTTEGO to request a quotation or more information about the OD6625 outdoor LED display.