OD6297 / OUTDOOR LED DISPLAY

FTTEGO OD6297 Outdoor LED Display

The FTTEGO OD6297 is a P2.97 outdoor LED display built on a thin 1,000 × 1,000 × 100 mm aluminium panel. SMD1415 LEDs, a 3,840 Hz refresh rate and IP66 protection keep content clear and reliable outdoors, and the display is rated at 5,000–5,500 nits. Fine-pitch detail for closer outdoor viewing.

  • 3,840 Hz refresh rate
  • IP66 aluminium panel
  • Front and rear maintenance
FTTEGO outdoor LED display panel, front and rear views

Representative product image

ENGINEERING SNAPSHOT

Key specifications at a glance

FTTEGO OD6297 outdoor LED display — its key optical, panel and protection details.

P2.97 (2.97 mm)

Pixel pitch

5,000–5,500 nits

Brightness

IP66

Protection rating

3,840 Hz

Refresh rate

160° / 140°

Viewing angle

1,000 × 1,000 mm

Panel size

10,000:1

Contrast ratio

2.9 m

Minimum viewing distance

TECHNICAL DETAILS

Technical specifications

LED and display performance

ParameterSpecification
LED typeSMD1415
Pixel pitch2.97 mm (P2.97)
Pixel density112,896 pixels/m²
Module size500 × 250 mm
Module resolution168 × 84 pixels
Modules per panel8 (2 × 4)
Driving mode1/21 scan
Panel resolution336 × 336 pixels
Brightness5,000–5,500 nits
Viewing angle160° / 140°
Minimum viewing distance2.9 m
Contrast ratio10,000:1
Frame frequency50 / 60 Hz
Grey level14–16 bit
Refresh rate3,840 Hz

Panel, power and environment

ParameterSpecification
Panel size1,000 × 1,000 × 100 mm
Panel materialAluminium
Panel weight24 kg
MaintenanceFront and rear
Max / average power750 W / 200 W
Input powerAC 90–264 V
Ingress protectionIP66
Working temperature / humidity−30 to +60 °C / 10–85% RH
Storage temperature / humidity−30 to +60 °C / 10–85% RH

Brightness version, controller and accessory configuration are confirmed for each project. Share your wall size and viewing distance when requesting a quotation.

BUILT FOR OUTDOOR VISIBILITY

OD6297 key features

Bright, smooth picture

SMD1415 LEDs with 5,000–5,500 nits brightness, a 3,840 Hz refresh rate, 14–16 bit grey level and a 10,000:1 contrast ratio.

Thin, light aluminium panel

A 1,000 × 1,000 mm panel only 100 mm deep and 24 kg, holding eight 500 × 250 mm modules in a 2 × 4 arrangement.

Sealed for outdoor conditions

IP66 protection with a sealed power box and modules, and a working range of −30 to +60 °C at 10–85% humidity.

FTTEGO outdoor LED display panels, rear view
01 / OD6297 Outdoor LED Display

Where to Use It

With a minimum viewing distance of 2.9 m, the OD6297 suits storefronts, retail exteriors and building entrances where people view the screen from shorter distances. Typical applications include:

  • Outdoor advertising – campaigns and promotions on high-traffic routes.
  • Building facades – brand and information content on commercial buildings.
  • Stadiums and event venues – live content, sponsor messages and announcements.
  • Transport hubs – information and advertising for passengers.
  • Naked-eye 3D corner displays – using curved or 90° corner cabinets.

These are illustrative applications. The final installation design and equipment depend on the project.

OD6297 Outdoor LED Display / DETAILS3,840 HzRefresh rate
5,000–5,500 nitsMax brightness
02 / OD6297 Outdoor LED Display

Fine Detail, Even Up Close

The P2.97 pixel pitch gives a panel resolution of 336 × 336 pixels and 112,896 pixels per square metre, using SMD1415 LEDs with 1/21 scan driving. A 3,840 Hz refresh rate at 50/60 Hz and 14–16 bit grey levels keep motion smooth and gradients clean.

Brightness: 5,000–5,500 nits. Viewing angle 160° / 140°.

OD6297 Outdoor LED Display / DETAILS336 × 336 pxPanel resolution
24 kgPanel weight
03 / OD6297 Outdoor LED Display

Easy to Install and Service

LED modules can be removed from the front or rear, and a detachable power box combines the receiving card, hub card and power supply in one unit that is also serviceable from both sides.

Modules connect to the panel through a hard-connection hub, giving stable power and signal transmission without internal module cabling.

OD6297 Outdoor LED Display / DETAILS562.5 × 1,000 mmCurved cabinet option
90°Seamless corner
04 / OD6297 Outdoor LED Display

Curved and Corner Displays

The panel can be paired with a 562.5 × 1,000 mm curved cabinet to build seamless 90° L-shaped displays for naked-eye 3D content. Panels with a 45° cut edge also form right-angle corners.

Input power is AC 90–264 V, with maximum and average power of 750 W and 200 W.

CONTACT FTTEGO

Discuss the OD6297 Outdoor LED Display.

Contact FTTEGO for availability, configuration details and a quotation for your project.