OD6625 / OUTDOOR LED DISPLAY

FTTEGO OD6625 Outdoor LED Display

The FTTEGO OD6625 is a P6.25 outdoor LED display built on a thin 1,000 × 1,000 × 100 mm aluminium panel. SMD2727 LEDs, a 3,840 Hz refresh rate and IP66 protection keep content clear and reliable outdoors, and the display is available in 6,000–6,500 and 9,000–10,000 nit versions. Large-format visibility for facades and roadside media.

  • 3,840 Hz refresh rate
  • IP66 aluminium panel
  • Front and rear maintenance
FTTEGO outdoor LED display panel, front and rear views

Representative product image

ENGINEERING SNAPSHOT

Key specifications at a glance

FTTEGO OD6625 outdoor LED display — its key optical, panel and protection details.

P6.25 (6.25 mm)

Pixel pitch

Up to 10,000 nits

Brightness

IP66

Protection rating

3,840 Hz

Refresh rate

160° / 140°

Viewing angle

1,000 × 1,000 mm

Panel size

10,000:1

Contrast ratio

6.2 m

Minimum viewing distance

TECHNICAL DETAILS

Technical specifications

LED and display performance

ParameterSpecification
LED typeSMD2727
Pixel pitch6.25 mm (P6.25)
Pixel density25,600 pixels/m²
Module size500 × 250 mm
Module resolution80 × 40 pixels
Modules per panel8 (2 × 4)
Driving mode1/8 scan
Panel resolution160 × 160 pixels
Brightness6,000–6,500 / 9,000–10,000 nits
Viewing angle160° / 140°
Minimum viewing distance6.2 m
Contrast ratio10,000:1
Frame frequency50 / 60 Hz
Grey level14–16 bit
Refresh rate3,840 Hz

Panel, power and environment

ParameterSpecification
Panel size1,000 × 1,000 × 100 mm
Panel materialAluminium
Panel weight24 kg
MaintenanceFront and rear
Max / average power750 W / 200 W
Input powerAC 90–264 V
Ingress protectionIP66
Working temperature / humidity−30 to +60 °C / 10–85% RH
Storage temperature / humidity−30 to +60 °C / 10–85% RH

Brightness version, controller and accessory configuration are confirmed for each project. Share your wall size and viewing distance when requesting a quotation.

BUILT FOR OUTDOOR VISIBILITY

OD6625 key features

Bright, smooth picture

SMD2727 LEDs with 6,000–6,500 / 9,000–10,000 nits brightness, a 3,840 Hz refresh rate, 14–16 bit grey level and a 10,000:1 contrast ratio.

Thin, light aluminium panel

A 1,000 × 1,000 mm panel only 100 mm deep and 24 kg, holding eight 500 × 250 mm modules in a 2 × 4 arrangement.

Sealed for outdoor conditions

IP66 protection with a sealed power box and modules, and a working range of −30 to +60 °C at 10–85% humidity.

FTTEGO outdoor LED display panels, rear view
01 / OD6625 Outdoor LED Display

Where to Use It

With a minimum viewing distance of 6.2 m, the OD6625 suits large building facades, roadside advertising and stadium surroundings viewed from longer distances. Typical applications include:

  • Outdoor advertising – campaigns and promotions on high-traffic routes.
  • Building facades – brand and information content on commercial buildings.
  • Stadiums and event venues – live content, sponsor messages and announcements.
  • Transport hubs – information and advertising for passengers.
  • Naked-eye 3D corner displays – using curved or 90° corner cabinets.

These are illustrative applications. The final installation design and equipment depend on the project.

OD6625 Outdoor LED Display / DETAILS3,840 HzRefresh rate
9,000–10,000 nitsMax brightness
02 / OD6625 Outdoor LED Display

Large-Format Impact

The P6.25 pixel pitch gives a panel resolution of 160 × 160 pixels and 25,600 pixels per square metre, using SMD2727 LEDs with 1/8 scan driving. A 3,840 Hz refresh rate at 50/60 Hz and 14–16 bit grey levels keep motion smooth and gradients clean.

Brightness: 6,000–6,500 / 9,000–10,000 nits. Viewing angle 160° / 140°.

OD6625 Outdoor LED Display / DETAILS160 × 160 pxPanel resolution
24 kgPanel weight
03 / OD6625 Outdoor LED Display

Easy to Install and Service

LED modules can be removed from the front or rear, and a detachable power box combines the receiving card, hub card and power supply in one unit that is also serviceable from both sides.

Modules connect to the panel through a hard-connection hub, giving stable power and signal transmission without internal module cabling.

OD6625 Outdoor LED Display / DETAILS562.5 × 1,000 mmCurved cabinet option
90°Seamless corner
04 / OD6625 Outdoor LED Display

Curved and Corner Displays

The panel can be paired with a 562.5 × 1,000 mm curved cabinet to build seamless 90° L-shaped displays for naked-eye 3D content. Panels with a 45° cut edge also form right-angle corners.

Input power is AC 90–264 V, with maximum and average power of 750 W and 200 W.

CONTACT FTTEGO

Discuss the OD6625 Outdoor LED Display.

Contact FTTEGO for availability, configuration details and a quotation for your project.